at the heart of drying
at the heart of drying since 1975
CONTROL SYSTEMS AND SOFTWARE
ELECTRONICS SUPPORTING EFFICIENCY
All Incomac driers are equipped with an electrical panel that allows the operator to control the ventilators, shutters, valves and spraying system, as well as a control system that manages the drying cycle.
The control system allows the operator to automatically or manually control the main functions of the drying process and manage it using a supervision software, allowing them to achieve the desired drying quality. The supervision software allows for one or more chambers to be connected to a PC and to view all the data and graphics relating to the drying cycle.
Exclusively controls the chamber temperature and how long the various stages last. It is only used for streaming chamber.
Checks the drying process using the t°, EMC and MC parameters (4 sensors), it is installed in chambers with a small capacity.
Checks the drying process using the t°, EMC and MC parameters (from 4 to 32 sensors), can also be used for heat treatment. Wireless sensors available.
Used for heat treatment in Italy as it is Fitok-certified. It can also be used for drying.
SOCRATES ADVANCED checks the drying process using the t°, EMC and MC parameters. There may be 1 to 4 t° and EMC sensors per cell and there may be anything from 4 to 32 MC sensors per cell, in both the wire and wireless versions.
500 stored drying programmes, which automatically adapt based on the wood’s actual initial conditions. Calculation of energy consumption (electricity, thermal, gas, etc.). Management of one or more anemometers to measure air speed.
Possible STOP and GO programming. Adjustable hysteresis for all functions.
Configuration to correct wood humidity.
DISCOVER THE INCOMAC’S WORLD
DOWNLOAD OUR BROCHURE